The Ghost Immobiliser

Immobilisers can be a powerful weapon in the fight against car theft. They prevent vehicles from being started without a key fob. They also work well to stop hotwiring and other traditional methods of vehicle theft. However, newer techniques like key replication and relay theft are becoming more widespread.

The Ghost Immobiliser has been designed to combat these new trends and make your car inaccessible. It doesn't rely on LED indicators radio signals, key fobs and is silent and discreet.

Easy to install

The Ghost Immobiliser is a revolutionary device that connects to the CAN data network inside your vehicle to prevent key theft and cloning. It is a TASSA approved product, and insurance companies endorse it. It operates silently and is virtually unnoticeable to thieves. It uses buttons on your steering wheel as well as the central console to create a unique pin-code sequence that you must enter before you can begin the vehicle. You can create up to 20 different sequences to increase security. The system is simple to set up and does not require any additional hardware or wiring.

To ensure the best possible results It is recommended that you use a reputable CAN-immobiliser installer who specializes in your vehicle type. Ideally, they will have a workshop close to you where you can go to get your installation done. They will also have a range of tools and materials to help you with the installation process. These include basic hand tools, a multimeter, and insulation tape as well as heat shrink tubing to secure connections. A user manual will give you the necessary instructions for your vehicle's wiring.

Before beginning the installation remove the battery from the circuit to prevent short circuits and airbag deployment. It is essential to verify the location of the CAN H and L wires, as the wrong identification could result in an inefficient system integration. It is also a good idea to label or mark the wires. Additionally, you can make use of a multimeter to confirm that the power source identified provides a consistent 12V supply.

Advanced thieves employ a variety of tactics to bypass the Ghost Immobiliser, including blocking and spoofing signals. These techniques work by amplifying signals sent from the key fob to your vehicle's electronic controller unit. However, with the latest anti-jamming technology and vigilant monitoring you can shield your vehicle from these sophisticated attacks.

Enhanced security

Ghost immobilisers provide an additional layer of protection to your vehicle from theft. It uses a PIN protection system that you can enter using buttons on your steering wheel or dashboard making it difficult for thieves to take your car. The device is also designed to be hidden within the vehicle, and is devoid of LEDs or other signals that would alert a potential thief to its presence. It communicates with your car's ECU via the data bus, meaning it is not susceptible to the same hacking and relay attacks that can cripple conventional security systems.

This system is a great investment for those who own high-end cars, since they are at greater risk of being stolen because of their value and their popularity. Its enhanced features protect your vehicle from key copying and ECU swapping. Some ghost immobilisers can also be connected to an app, allowing you can easily arm and dearm them. They can also have the option of a service/valet mode, which allows you to temporarily disable them while your vehicle is being repaired or serviced.

Another benefit of a ghost immobiliser is that it doesn't require cutting of wire. This is an excellent feature, especially if your car is newer and doesn't come with an immobiliser. Certain systems can also be integrated with GPS tracking devices, providing an extra layer of security to your vehicle. A GPS tracker could also lower your insurance costs. If you choose to buy an immobiliser that is ghost, make sure it is TASSA-verified and that a professional installer installs the device for you.

Compatibility with all major makes and models

The Ghost Immobiliser has been designed to work with all major vehicle models and makes, safeguarding your prized possessions from theft. It makes use of buttons on your steering wheel, the centre console, or door panels to generate an individual pin code which you must enter before you are able to drive your vehicle. It is tamper-proof, undetectable, and backed by three-year warranty. It is also fully endorsed by insurance companies This means that it can lower your insurance premiums.

The Ghost system differs from the standard immobilisers that use the key fob for ignition control. It connects directly to the engine controller via the CAN bus. It is virtually impossible to disable, remove or hack. Additionally to this, the Ghost system can be connected with a secure iPhone application that permits remote management and monitoring.

You can choose an PIN code that is easy to remember, but mathematically impossible for thieves to guess. The PIN can be customized and modified at any time so that you can ensure your vehicle is safe even when you park it on the street or in a parking lot. You can also choose valet or service mode in the event that someone else requires your vehicle temporarily or when it is in the garage. This feature will also help prevent your car from being taken by a shady mechanic. For added peace of mind you can choose a Ghost call alert which will inform you when your car is moving or it's moved.

Convenience

The ghost immobiliser is a highly effective security system, securing your vehicle against common methods of theft such as key cloning, key stealing and relay attacks. It works by connecting with the vehicle's data network CAN, and blocking communication with engine ECU. This system makes it difficult for criminals to hack or copy your vehicle.

Installed, you'll need to enter a PIN of up to 20 digits using the buttons on the dashboard and the steering wheel to begin the car. The system is completely concealed and unnoticeable to thieves because it does not emit any radio frequency signals. It can be set up with a PIN number that is user-changeable, adding to its security. The system is also designed to prevent circuit cutting and makes it virtually impossible to tamper with.

If you do have a problem remembering your PIN, there are systems that allow you to communicate with the immobiliser via an app on your smartphone, disarming it instantly. Some systems even have a service/valet setting that allows you to start your car, for instance, when you drop it off at valet or garage.

The Ghost Immobiliser is also inaccessible to thieves, since it doesn't transmit radio signals. This is a significant benefit over other security products that are available from the aftermarket. It is also easy to use, and doesn't require complex wiring. It can be used in combination with dash cams to provide added safety. Dash cam Thinkware F70 features clear and crisp 1080p HD footage, Format Free Technology, and parking mode. The Keylab can be hardwired to guarantee maximum performance and longevity.

Installation

If you want to protect your vehicle from thieves it is important to select the right immobiliser. This device can help prevent car theft by blocking the communication between the engine controller unit (ECU) and key fobs. This device blocks thieves from intercepting and cloning the signal that allows you to start your vehicle. It also detects any time it has been tampered with and notify the owner of the vehicle.

The device is simple to install and integrates with the existing systems in your vehicle. It doesn't require any modifications to vehicle wiring and can be installed in a hidden location such as under the dashboard. Follow the directions in the manual to ensure the device is installed correctly. After installation, it is essential to test the system. This will ensure that the ghost of the immobiliser functions as intended.

You can purchase an Autowatch Ghost 2 Immobiliser from an approved installer and get it installed on your vehicle. The installer will connect the Ghost to the CAN Bus network in your vehicle, which makes it difficult for thieves to steal or bypass the system. The installation process generally takes between 2 and 3 hours.

When installing the Ghost, it is recommended to consult the wiring diagram for your vehicle model. This will enable you to identify the CAN High and CAN Low wires required to connect your Ghost to the engine of your vehicle. It is also important to double-check the connections to make sure that they are secure and properly insulated.

After the installation is completed and you are able to use the Ghost Immobiliser during normal operation. It will shut off the ignition of your vehicle if you don't start it using the correct PIN, which you will need to enter yourself. The ghost of the immobiliser can be set to Service/Valet Mode for when you require your vehicle to be cleaned or valet parking.